Simplicity 3790

I was tempted, after muslin two, to skip the final version, but I wanted to carry this project to its end. I think the extra fabric right where I have extra me is not a good look for me, but one of these tops isn't too bad to own. I'm glad I finished this, since I discovered that it's not as bad as I had envisioned.

There are the changes I made to muslin two:

• trimmed a little from the sleeve cap in the front and back
• trimmed some of the front edge of the criss cross so it would end closer together. I wanted to create a deeper V in front, hoping to create a stronger vertical line and less bulk in front
• lengthened the bodice top three inches.
• replaced the fabric that I had removed from the bottom in muslin 2
• did a full back adjustment
• removed 3/4" from the back neck edge.

If I was going to make it again, I'd remove about an inch of that 3 inches I added to the bodice top.

The biggest thing I learned is that I need to adjust for my high round back. I thought I had a broad back, but considering my narrow shoulders, that didn't seem to make sense. I have a hump on my back, which I share with many family members. My son asked if he has one, and yes he does. I suggested he get a good look at his relatives' backs this Sunday. They are all coming for dinner. I don't know what he's more horrified over, that his mother said he had a hump, or that his mother said to check out all his relatives' humps.

I wore muslin two a few times around the house, and I found myself pulling on the back, trying to get it off my neck. It felt high on my back neck and like it was riding up. If you click on the picture for the big view, you can see the hump.

I used the directions on page 86 of Perfect Fit from the Singer Sewing Reference Library. Their directions are much like the directions for a high round back alteration in Fit For Real People on page 123 under add a neck dart.

A high round back alteration is really a full bust alteration where you put the dart into the neck edge instead of the side seam. Once I thought of my hump like one boob centered high on my back, I realized I had the skills to deal with it.

I like it.

Muslin #2

My goals for muslin #2 were:

• make fitting changes to Simplicity 3790
• learn to use my binder attachment for my brother 2340 CV coverstitch machine

Fitting:

• I added a separate sleeve by overlaying the bodice from view D on view A.
• I added length for my dropped waist to the "flounce," as it is now called at my house, and also to the bodice.
• I brought in the neckline a little.

The shoulder was way to big. It just flopped off of me.

I cut out a 22. According to the measurements, it would be too small for me, yet I still needed to take 2 inches off of each shoulder. I went to both Sherril's and Debbie's blog and stared at some of their knit tops. In their knit tops, the shoulder seam sits on the shoulder point. I took a deep breath and did it.

I'm glad I did it. I don't think the style suits me, but the shoulders fit to beat the band! I really learned something. Apparently, the only part of me that is small is the distance from my neck to my shoulder. Humph.

My husband took the picture of me in the sleeveless version. I told him that if one takes a picture of something sewed for a sewing blog, it is customary in include the sewed garment. He said, "What? The flounce matters? Tell them it looks like every other flounce." Usually my son takes the pictures. He's more patient.

I ended up taking 3 inches of length off the flounce and four inches off the bell shaped sleeves at the wrist, tapering to the seamline above the elbow.

Thanks to Sherril and Debbie for including muslins and discussions of fitting issues. You have helped me push myself out of my comfort zone to try to tackle my fitting challenges. I am tempted to leave off pictures of myself in anything less that successful garments, but showing each other how we get to success is as worthwhile as sharing our success. Thanks, guys!

Binder Attachment:

The binder attachment was easy! I was so afraid that I'd have trouble getting it right. I have little patience with sewing machines. But it was easy! I had to fiddle a bit, but things got corrected simply and quickly. I like it! It looks so professional. I am also getting smoother with thread removal and such. My problems the first day were definitely thread related. For this project, I started with two new spools of thread, and I had no problems.